HOW TO UNBRICK YUREKA

Today in this guide we will show you a simple and easiest method to restore the Cyanogen OS on YU Yureka Micromax. The guide is very easy and doesn’t requires using any commands or a toolkit. A simple script will let you automatically flash the stock firmware on Yureka in less than 2 minutes.

 INSTALL DRIVERS PROPERLY:

1. If you are following this blog properly if would have known how to install drivers properly.If no click here.

 

FLASH STOCK ROM ON YUREKA:

1. Download Yureka factory image here and extract the folder on your desktop.
2. Now download the ADB and Fastboot file on your desktop from here and extract the folder. 
3. Now move all the Cyanogen OS file that you download on step 1 to the ADB folder.
4. Power off your phone, Press and hold the Volume Up key,With the Volume Up key, connect the phone to your PC/Laptop with USB cable,You can let go off the Volume Up key when Fastboot Mode is displayed on the screen.
5. Once your phone in fastboot mode, Run flash-all.bat by double clicking on it.
6. Now a command windows will open on your screen, and flashing process will start. DO NOT disconnect the device during flashing procedure. The command window will close after the flashing process is over.
7. Disconnect the USB cable, and boot the phone normally by long pressing the Power button.
8. ENJOY!!! YOUR DEVICE IS UNBRICKED NOW.

Note: This guide will WIPE entire data on your phone, except any data stored on the external microSD card. Before proceeding, make sure your phone is charged and you’ve taken a backup of your important data. Read all the instruction very carefully and follow all the steps one by one on your phone.